Firmware Update for OM Digital Solutions DIGITAL CAMERA

[ E-M1X ]

[ Precautions when updating firmware ]

Be sure to have a fully charged battery in the camera.
Without sufficient power, the update may fail or will not start.
It takes time to complete the update depending on the internet speed due to the large file size for the firmware.
Do not disconnect the USB cable during the update until the OK icon is displayed.
It takes about 5 minutes until the OK icon is displayed after the writing icon is displayed on the monitor of the camera.

Ver.2.4 (Jan. 16 2023)	AF operation when a M.ZUIKO DIGITAL ED 90mm F3.5 Macro IS PRO lens is attached has been optimized.
Ver.2.3 (Feb. 28 2022)	Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 40-150mm F4.0 PRO". Improved precision of focus when using single-focal-length lenses.
Ver.2.2 (Jul. 19 2021)	Improved precision of focus when using single-focal-length lenses. Corrected the following problems that occurred when connecting to an external recorder with Monitor or Record output mode: * The external recorder does not start recording when pressing the camera's record button if REC Bit is On. * Time code is not transmitted to the external recorder if Time Code is On.
Ver.2.1 (Apr. 06 2021)	USB transmission with Mac equipped with M1 chip is now supported. Stability of connection with ATOMOS products has been improved.
Ver.2.0 (Dec. 03 2020)	“Birds” was added to Tracking Subject. RAW output is possible for HDMI recorder NINJA V from ATOMOS Limited. The HDMI recorder NINJA V uses Apple ProRes RAW codec to record video. Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 150-400mm F4.5 TC1.25x IS PRO". Focus distance indicator can be displayed when shooting with manual focus. Stability of image stabilizer operation when shooting video has been improved.
Ver.1.3 (Aug. 04 2020)	Possible to use in-camera focus stacking mode with "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS". Image stabilization performance when using "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" has been improved. * Roll compensation is available with the image stabilization function of the body, along with the pitch and yaw image stabilization function of the lens. * The "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" is not compatible with 5-axis Sync IS.
Ver.1.2 (Feb. 12 2020)	Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-45mm F4.0 PRO". When EVF Auto Switch is set, you can select how the viewfinder is displayed when the monitor is open. Off: Disables the eye sensor. Press the button to switch between the EVF display and the monitor display. On1: Eye sensor operates regardless of whether the rear monitor is open or closed. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display. On2: The eye sensor does not operate while the rear-panel monitor is open. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display. See the following for details.
Ver.1.1 (Jun. 19 2019)	Now possible to develop RAW data at high speeds in Olympus Workspace by using the camera's image processing engine.

Ver.2.4
(Jan. 16 2023)

AF operation when a M.ZUIKO DIGITAL ED 90mm F3.5 Macro IS PRO lens is attached has been optimized.

Ver.2.3
(Feb. 28 2022)

Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 40-150mm F4.0 PRO".
Improved precision of focus when using single-focal-length lenses.

Ver.2.2
(Jul. 19 2021)

Improved precision of focus when using single-focal-length lenses.
Corrected the following problems that occurred when connecting to an external recorder with Monitor or Record output mode:
- * The external recorder does not start recording when pressing the camera's record button if REC Bit is On.
- * Time code is not transmitted to the external recorder if Time Code is On.

Ver.2.1
(Apr. 06 2021)

USB transmission with Mac equipped with M1 chip is now supported.
Stability of connection with ATOMOS products has been improved.

Ver.2.0
(Dec. 03 2020)

“Birds” was added to Tracking Subject.
RAW output is possible for HDMI recorder NINJA V from ATOMOS Limited.
The HDMI recorder NINJA V uses Apple ProRes RAW codec to record video.
Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 150-400mm F4.5 TC1.25x IS PRO".
Focus distance indicator can be displayed when shooting with manual focus.
Stability of image stabilizer operation when shooting video has been improved.

Ver.1.3
(Aug. 04 2020)

Possible to use in-camera focus stacking mode with "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS".
Image stabilization performance when using "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" has been improved.
- * Roll compensation is available with the image stabilization function of the body, along with the pitch and yaw image stabilization function of the lens.
- * The "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" is not compatible with 5-axis Sync IS.

Ver.1.2
(Feb. 12 2020)

Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-45mm F4.0 PRO".
When EVF Auto Switch is set, you can select how the viewfinder is displayed when the monitor is open.
- Off: Disables the eye sensor. Press the button to switch between the EVF display and the monitor display.
- On1: Eye sensor operates regardless of whether the rear monitor is open or closed. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
- On2: The eye sensor does not operate while the rear-panel monitor is open. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
- See the following for details.

Ver.1.1
(Jun. 19 2019)

Now possible to develop RAW data at high speeds in Olympus Workspace by using the camera's image processing engine.